Industrial Products Manufacturing Company






About Us

Contact Us










Back to Ezebond Menu Page















(For Industrial Use Only)


Material Safety Data Sheet


Proprietary mixture of titanate coupling agents and additives ●  Grades: EB-816, EB-412, EB-412A, EB-927


SECTION l - Manufacturer’s Name and Address


Industrial Products Manufacturing Company

108/109, Parmar Chambers, 3/4, B. J. Road,

Pune 411 001, India

Tel: 020-26129521

MSDS Last Updated: January 2011



SECTION 2 – Composition/Hazardous Ingredients






Titanate Coupling Agent



             Hazardous Ingredients: Traces of 2-Ethyl Haxanol


SECTION 3 – Hazard Identification


·       Route of Entry: Inhalation: Yes (accidental only), Skin: Yes (improper handling), Ingestion: Yes (accidental only)

·       Health Hazard (acute and chronic): N.A.

·       Signs and Symptoms of Exposure: Direct contact with skin and eyes can cause irritation.                   

       Inhalation and ingestion can cause vomiting, nausea, headache, dizziness, drowsiness.

·       Medical Conditions Generally Aggravated by Exposure: data not available


SECTION 4 – First Aid Measures


·       Skin Contact: Immediately flush with plenty of running water and soap. Take away contaminated clothing.

·       Eyes Contact: Immediately flush with plenty of running water for at least 15 minutes.

·       Inhalation: If necessary, get medical care.

·       Ingestion: Do not induce vomiting. Call a physician.


SECTION 5 - Fire and Explosion Hazard Data


·       Flammable: Yes    Auto ignition: No

·       Flash Point: 165° F (closed cup)

·       Extinguishing Media: Foam, Carbon Dioxide, Dry Chemical

·       Hazardous Combustion Products: Oxides of carbon and nitrogen

·       Special Fire Fighting Procedures: Use self-contained breathing apparatus, protective clothing. Avoid human exposure to smoke, fumes or products of combustion.

·       Unusual Fire and Explosion Hazards: None


SECTION 6 – Accidental Release Measures


·       1. Steps to be taken in case material is released or spilled: Use absorbent materials for organic compounds

·       2. Waste Disposal Method: Dispose off in accordance with government environmental control regulations.


SECTION 7 – Handling and Storage


·       All chemicals require safe handling. Use protective gear. Handle with care.

·       Store products in a cool, dry, ventilated area.

·       Keep products away from children at all times.

·       Always keep containers closed before and after the use

·       Product is strictly for Industrial use


SECTION 8 – Exposure Control / Control Measures


·       Respiratory Protection: Self-contained breathing apparatus may be used when handling

·       Ventilation: Local Exhaust - Required in a closed area, Special - None

·       Protective Gloves: PVC or Rubber gloves 

·       Eye Protection: Splash proof safety goggles 

·       Other: Wash hands before and after work. No eating drinking or smoking in work place

·       Clothing/Equipment: Protective aprons and outfits may be used

·       Work/Hygienic Practices: Follow good practices.


SECTION 9 - Physical/Chemical Characteristics


Physical State: Creamish/Brown liquid

VOC: <0.5%

Solubility: Insoluble in water

Odour: Mildly organic, characteristic

Freezing Pint: N.D.

pH: 6.5 to 7.2

Specific Gravity: ~ 0.9

Boiling Point: N.D.

Flash Point: 165° F (closed cup)


SECTION 10 – Stability & Reactivity


·       Stability: Stable in cool dry place at room temperature. Avoid direct sunlight or over heated areas.

·       Incompatibility: Avoid strong acids and oxidizing agents

·       Hazardous Decomposition or Byproducts: Carbon dioxide, Carbon monoxide, nitrogen oxide, irritating fumes

·       Hazardous Polymerization: Will not occur.

·       Conditions to Avoid: N.E.


SECTION 11 – Toxicological Information


·       No toxicology testes are available


SECTION 12 – Ecological Information


·       No aquatic toxicity testes are available


SECTION 13 – Disposal Considerations


·       Dispose off in accordance with the local, state & central government environmental control regulations.


SECTION 14 – Transport Information


·       Not a regulated product, Harmonized Tariff Code:  2931.00.9050


SECTION 15 – Regulatory Information


·       Material is not regulated  | WHMIS: Not a controlled material

·       OSHA: Non Hazardous | SERA Components: None


SECTION 16 – Other Information


N.A. = Not Applicable, PEL= Permissible Exposure Limit, N.E. = Not Established, N.D. = Nor Determined


All Ezebond formulations are subject to strict quality control, innovations and improvements.

The above information is given on the basis of our best knowledge and information and is for your guidance only.

Specifications, however, are subject to change and no guarantee is given or implied.



All Rights Reserved. 1980 - 2015





















































Industrial Products Mfg. Company 108-109 Parmar Chambers, 3/4 B. J. Road, Pune 411001 India   ●   Tel: 91-020-26129521  ●   Fax: 91-20-26124362

Since 1981