|
Protecto-KleanCoat
Antifungal,
Anti-bacterial Water-based PU Wall Coatings
►
Description
Protecto-KleanCoat
is
a revolutionary,
eco-friendly,
two pack, clear as well as pigmented aliphatic Polyurethane
coating
made
with
water
based
technology
which
provides
total
protection
to walls and partitions.
It
helps seal the porosity of the surface and
gives
the
surface
a superb,
rich
finish
with unmatched fungus/bacteria resistance as well as scratch and
abrasion resistance.
Both
glossy and matte finishes are available
It
is
brought
to
you
by
IPMC,
Pune,
the
pioneers
in
manufacturing
of
polyurethane
coatings
since
more
than
25 years.
►
Salient Features
-
Excellent protection against fungus and bacteria
-
Eco-friendly, water- based
-
High resistance to mild acids, alkalies and chemicals
-
Excellent scratch resistance
-
High abrasion resistance
-
Good stain resistance
-
Easy to clean and maintain
-
Good UV resistance
►
Application
The
surface should be clean, level and free of all oily impurities and
dirt.
Primer Coat: Mix the two components of Protecto-KleanCoat
penetrative primer in 1:4 ratio by volume and brush or roller it
over the surface. The coating will be tack-free within 15 minutes
depending on the ambient temperature and relative humidity.
Top
Coats: Mix the two components of Protecto-KleanCoat top-coat in 1:4
ratio by volume and apply it by brush, roller or spray. Apply
additional coats as per requirement keeping a gap of 3-4 hours
between coats.
►
Properties
|
Appearance: |
White
liquid |
|
Mixing ratio: |
1:4 by volume |
|
Pot life at 25ºC: |
3 hours |
|
Coverage: |
9-10
sq.m/kg/coat
spraying
10-12
sq.m/kg
brushing |
|
Tack
free
time
(25°C): |
10-15
minutes |
|
Re-coatability: |
After
3-4
hours |
|
Abrasion Resistance |
Excellent |
|
UV Resistance |
Excellent |
|
Fungus & Bacteria
Resistance |
Excellent |
►
Storage and Precautions
Protecto-KleanCoat
should
be
stored
in
a cool
and
dry
area.
It
can
be stored
for
12
months
in
its
original,
unopened
container.
While
handling,
all
contact
with
eyes,
skin,
and
clothes
should
be
avoided.
Implements
used
for
application
of
Protecto-KleanCoat
should
be
cleaned
with
excess
water.
In case
of
accidental
swallowing,
drink
large
quantities
of
water
and
seek
medical
help.
In
case
of
any
splashing
in
the
eye,
rinse
with
cold
running
water
for
10-15
minutes
Protecto-KleanCoat
formulations are subject to strict quality control, innovations
and improvements to comply with our high standards.
The above information is given on
the basis of our best knowledge and information and is for your
guidance only.
Specifications, however, are
subject to change and no guarantee is given or implied. All
Rights Reserved.
Last Updated - January 2015
|
DEVELOPED & MANUFACTURED BY:
Industrial Products Mfg. Co.
|
108/109 Parmar Chambers,
3/4 B. J. Road, Pune 411001 INDIA
Tel: 91-20-26129521, 26122612
Fax: 91-20-26124362
E-mail: Contact@IPMCIndia.com
www.IPMCIndia.com
www.ProtectoCoatings.com
|
All
Rights Reserved. 1980 - 2015
|
™ 