Home

About Us

Roof

Coatings

Wood

Coatings

Floor

Coatings

Wall

Coatings

Glass

Coatings

Anti-Corrosion

Coatings

Customer List

Contact Us

                   

 

 

 

Surface Protection Solutions

    

 

 

 

 

 

 

 

 

 

 

 

 

 

     

 

     

  

Manufacturer of advanced polyurethane based systems for residential, commercial and industrial markets!

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protecto-Ezefil

 

CRACK/JOINT FILLING COMPOUND

 

 

DESCRIPTION:

 

Protecto-Ezefil crack/joint filling compound is a solvent free two component polyurethane reactive system. This material sets to give a highly elastic, non - cracking mass which can be used very effectively to fill and seal joints and cracks in all types of constructions.

 

USES:

 

Protecto-Ezefil can be used to fill expansion joints, cracks & joints in high traffic floors, bathrooms, cement/metal roofing sheets, slabs, external walls and frames of doors & windows.

 

APPLICATION:

 

Small cracks should be opened and cleaned of any dirt and loose particles. A base adhesion coat of Wallgard 10 is applied on all sides of the cracks and allowed to dry for 15 minutes. Protecto-Ezefil 400 and 500 are mixed together in the ratio of 3:2 by weight. For horizontal cracks and joints this mixture is poured directly into the cracks. For vertical cracks, up to two parts of white cement should be mixed thoroughly with 1 part of Protecto-Ezefil 400 and 500 mixture and the resulting mixture is then used to fill the cracks by means of a spatula or putty knife. A coat of Ezecoat 500 & 600 is applied over the Protecto-Ezefil to make it resistant to U.V. rays.  

 

PROPERTIES:

 

Colour

Mixing Ratio

Pot Life

Tack Free

Time

Tensile Strength

(IS 2508-1984)

Elongation

(IS 2508-1984)

Flexibility

 

Protecto-Ezefil 400-clear

 

 

Protecto-Ezefil 500-white

 

0.4 kg Protecto-Ezefil 400

   

 

0.6 kg Protecto-Ezefil 500

 

 

45-60 minutes

at 30C

 

3 - 5 hrs

 

10 -15 kg/sq.cm

 

300%

 

Excellent

 

 

CONSUMPTION:

 

Length of joint in cm per kg of Protecto-Ezefil mixture = 1000 (d x D x W)

Where D = depth of joint (cm). W = width of joint (cm), d = density of mixture as per Table 1.

     

Table 1:          

 

     

Application

Protecto-Ezefil

Mixture

White

Cement

Density of

Mixture g/cm2

 

Expansion joints

 

Cracks in external wall

 

Joints in cement/ metal roofing

 

Cracks/joints in

Basements in bathrooms

 

Joints in window

frames & pipe fittings

 

1 Part

 

1 Part

 

1 Part

 

1 Part

 

 

1 Part

 

Nil

 

0.5 Part

 

1 Part

 

1.5 Part

 

 

2 Parts

 

1.17

 

1.44

 

1.62

 

1.82

 

 

1.94

                                                                  

 

Table 2: Consumption of Protecto-Ezefil mixture (gm) per meter of joint  

W

D

0.5

cm

1

cm

1.5

cm

2

cm

2.5

cm

3

cm

3.5

cm

0.5 cm

29

59

88 

117  

146  

176 

205 

1 cm

59

117

137

134

293

352

410

1.5 cm

88

177

264

352

441

59

617

2 cm

117

234

352

469

588

704

819

2.5 cm

146

293

441

588

735

885

1031

 

 


All Protecto-Ezefil formulations are subject to strict quality control, innovations and improvements.

The above information is given on the basis of our best knowledge and information and is for your guidance only.

Specifications, however, are subject to change and no guarantee is given or implied.

Last Updated - April 2013


 

 

DEVELOPED & MANUFACTURED BY:

Industrial Products Mfg. Co.

 

108/109 Parmar Chambers,

3/4 B. J. Road, Pune 411001 INDIA

Tel:  91-20-26129521, 26122612

Fax: 91-20-26124362

E-mail: Contact@IPMCIndia.com

www.IPMCIndia.com

www.ProtectoCoatings.com

 

 

 

All Rights Reserved. 1980 - 2015

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Industrial Products Mfg. Company 108-109 Parmar Chambers, 3/4 B. J. Road, Pune 411001 India

www.IPMCIndia.com   ●   Tel: 91-020-26129521  ●   Fax: 91-20-26124362

Since 1981