Home

About Us

Roof

Coatings

Wood

Coatings

Floor

Coatings

Wall

Coatings

Glass

Coatings

Anti-Corrosion

Coatings

Customer List

Contact Us

                   

 

 

 

Surface Protection Solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

     

 

     

  

Manufacturer of advanced polyurethane based systems for residential, commercial and industrial markets!

  

 

 

 

 

 

 

 

Protecto-Stonegard

 

Polyurethane based Coatings

for Stone/Brick Facades

  

 

 

Description

 

Protecto-Stonegard coatings form a transparent, elastic, waterproof, abrasion resistant, anti fungal, protective film when applied over stone or brick facades. It helps seal the porosity of the stone and protects the surface from erosion as well as the harmful effects of environmental pollution. Both glossy and matte finishes are available.

 

Application

 

The surface should be clean and free of all oily impurities and dirt. Spray or brush on Protecto-Stonegard (glossy or matte) over the surface. The coating will be dry within 2-3 hours depending on the ambient temperature and relative humidity. Apply more coats as per requirement keeping a gap of 2-3 hours between coats.

 

Uses

 

These coatings can be used to protect a wide range of bricks and stones including marbles and granites. They are highly abrasion and scratch resistant and have very good resistance to fungi and bacteria. They have good stain resistance and are easy to clean and maintain.

 

 

Properties

 

Colour

Milky coating which becomes

 

Colourless on drying

Coverage    

3-10 sq.m/kg depending on the

 

porosity of the surface.

Drying Time (25° C)

2 -3  hours

Flexibility

Good

Abrasion Resistance

Good

UV Resistance

Excellent

Fungus & Bacteria Resistance

Excellent

 

 

Storage and Precautions

 

Protecto-Stonegard should be stored in a cool and dry area. It can be stored for 12 months in its original, unopened container. While handling, all contact with eyes, skin, and clothes should be avoided. Implements used for application of Protecto-Stonegard should be cleaned with excess water. In case of accidental swallowing, drink large quantities of water and seek medical help. In case of any splashing in the eye, rinse with cold running water for 10-15 minutes

 

 

           

 

 


Protecto-Stonegard formulations are subject to strict quality control, innovations and improvements t o comply with our high standards.

The above information is given on the basis of our best knowledge and information and is for your guidance only.

Specifications, however, are subject to change and no guarantee is given or implied. All Rights Reserved.

Last Updated - April 2013


 

 

DEVELOPED & MANUFACTURED BY:

Industrial Products Mfg. Co.

 

108/109 Parmar Chambers,

3/4 B. J. Road, Pune 411001 INDIA

Tel:  91-20-26129521, 26122612

Fax: 91-20-26124362

E-mail: Contact@IPMCIndia.com

www.IPMCIndia.com

www.ProtectoCoatings.com

 

 

 

All Rights Reserved. 1980 - 2015

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Industrial Products Mfg. Company 108-109 Parmar Chambers, 3/4 B. J. Road, Pune 411001 India

www.IPMCIndia.com   ●   Tel: 91-020-26129521  ●   Fax: 91-20-26124362

    Since 1981