Protecto-Wallgard
DAMPROOFING / ANTI-FUNGAL SYSTEM
►
DESCRIPTION:
Protecto-Wallgard coatings, when
applied over walls and wooden structures (either
clear or pigmented ), form an elastic, abrasion resistant, anti
fungal protective film that eliminates water seepage. If required,
decorative paints (solvent
based or water based emulsions) can also be applied over them.
They increase the life of the plastered/wooden surfaces, and do not
allow paint to peel off. Their special formulation and inherent properties
of the material retards growth of fungus and thereby reduces the frequency
of re-painting considerably.
►
This system can be used on
plastered walls, cement pointing, brick walls, stone walls, wooden doors
and windows of bathrooms/toilets and houses
►
APPLICATIONS:
Protecto-Wallgard can be applied in two ways:
(a) As a coloured coating-by applying a mixture of Protecto-Wallgard
10 and Protecto-Wallgard 30 over the surface. These coatings have
good ultraviolet resistance and are used for outdoor as well as
indoor damproofing applications.
(b) As a transparent coating-by applying only Protecto-Wallgard 10
over the surface. Transparent Protecto-Wallgard 10 coatings have
excellent antifungal properties together with damproofing properties
and are highly recommended for anti-fungal applications. They are,
however, not recommended for applications requiring direct exposure
to sunlight unless an additional coat to paint (either polyurethane
or oil or cement based) is applied over them.
In both cases the surface should be dry and all loose particles
should be removed by wire brushing and sand papering.
Any oil or grease on the surface should be removed by means of
de-greasing solvents or emulsifiers.
For plastered walls all cracks and joints should be filled up with a
paste made from W40 and cement/sand.
►
PHYSICAL
PROPERTIES:
|
|
|
|
|
Colour
|
Protecto-Wallgard 10 (Clear)
|
|
Protecto-Wallgard 30
(Coloured)
|
Mixing
Ratio
|
Protecto-Wallgard 10:30 = 2:1
|
|
|
Pot
Life (25 C)
|
Approximate 1 hour
|
Coverage
|
●
Smooth Surface:
90-110
sq.ft/kg
●
Rough Surface:
80-100
sq.ft/kg
|
Tack
Free Time (30°
C)
|
5 hours
|
Flexibility
IS 101
|
Does not crack at all working
temperatures - highly
flexible
|
Abrasion
resistance
|
0.1 (gms/1000 cycles)
|
►
ANTI FUNGAL PROPERTIES:
|
|
|
|
|
|
|
Test Organism
|
Zone of inhibition
|
|
|
|
|
Uncoated block
|
Coated block
|
|
|
|
Bacteria:
|
|
|
●
S.aureus
|
0
|
30
|
●
B.subtilis
|
0
|
30
|
|
|
|
Fungi:
|
|
|
●
A.niger
|
0
|
28
|
●
Penicillium
spp
|
0
|
54
|
|
|
|
All Protecto-Wallgard formulations are subject to
strict quality control, innovations and improvements.
The above information is given on the
basis of our best knowledge and information and is for your guidance
only.
Specifications, however, are subject to
change and no guarantee is given or implied.
Last Updated - April 2013
DEVELOPED & MANUFACTURED BY:
Industrial Products Mfg. Co.
|
108/109 Parmar Chambers,
3/4 B. J. Road, Pune 411001 INDIA
Tel: 91-20-26129521, 26122612
Fax: 91-20-26124362
E-mail: Contact@IPMCIndia.com
www.IPMCIndia.com
www.ProtectoCoatings.com
|
All
Rights Reserved. 1980 - 2015
|