Protecto-WeatherKare

Polyurethane based Coating for exterior walls

► Description

Protecto-WeatherKare coatings form a transparent, elastic, waterproof, abrasion resistant, anti fungal, protective film when applied over painted exterior walls. It helps seal the porosity and protect the surface from erosion as well as the harmful effects of environmental pollution. Both glossy and matte finishes are available.

► Application

The surface should be clean and free of all oily impurities and dirt. Spray or brush on Protecto-WeatherKare (glossy or matte) over the surface. The coating will be dry within 2-4 hours depending on the ambient temperature and relative humidity. Apply more coats as per requirement keeping a gap of 2-4 hours between coats.

► Uses

These coatings can be used to protect a wide range of bricks and stones including marbles and granites. They are highly abrasion and scratch resistant and have very good resistance to fungi and bacteria. They have good stain resistance and are easy to clean and maintain.

► Properties

► Storage and Precautions

Protecto-WeatherKare should be stored in a cool and dry area. It can be stored for 12 months in its original, unopened container. While handling, all contact with eyes, skin, and clothes should be avoided. Implements used for application of Stonegard should be cleaned with excess water. In case of accidental swallowing, drink large quantities of water and seek medical help. In case of any splashing in the eye, rinse with cold running water for 10-15 minutes

Protecto-WeatherKare formulations are subject to strict quality control, innovations and improvements t o comply with our high standards.

The above information is given on the basis of our best knowledge and information and is for your guidance only.

Specifications, however, are subject to change and no guarantee is given or implied. All Rights Reserved.

Last Updated - April 2013